均苯三酚改性三聚氰胺-甲醛气凝胶的制备与表征  

Preparation and characterization of melamine-formaldehyde aerogel modified by phloroglucinol

作　　者：刘天时[1,2,3] 陈庚[1,2,3] 任洪波[2] 张林[2,3] 

机构地区：[1]西南科技大学材料科学与工程学院,四川绵阳621010 [2]中国工程物理研究院激光聚变研究中心,四川绵阳621900 [3]西南科技大学极端条件物质特性实验室,四川绵阳621010

出　　处：《强激光与粒子束》2012年第11期2642-2646,共5页High Power Laser and Particle Beams

基　　金：高温高密度等离子体物理国防科技重点实验室基金项目(51480030205ZW0802);国家高技术发展计划项目

摘　　要：以三聚氰胺、均苯三酚和甲醛为原料,经过溶胶凝胶、CO2超临界干燥,制备出由均苯三酚改性的最低密度为44mg/cm3、透明、不易开裂的三聚氰胺-甲醛(MF)气凝胶,利用Materials-Studio软件模拟,结果证明了均苯三酚的引入可以缩短凝胶时间。并采用扫描电镜(SEM),红外(FT-IR),热重(TGA)对样品进行了表征,测试表明:改性后的MF气凝胶具有由直径30nm的骨架构成三位连续空间网络结构,孔径约为100nm,且分布均匀,热性能也有所提高。Melamine-formaldehyde（MF） aerogels modified by phloroglucinol were prepared using melamine, phloroglucinol and formaldehyde by means of sol-gel and COz supercritical drying process. The lowest density of the modified MF aerogels is a- bout 44 mg/cm^3. The aerogel samples are transparent and unbroken. It is proved that shortening gelation time is caused by phlo- roglucinol through the Materials-Studio computer simulation. The samples were also characterized by SEM, FT-IR and TGA. These tests show that： the modified aerogels have the three dimensional space network structure, with uniform pore size distribu- tion and thermostability.

关 键 词：三聚氰胺-甲醛 气凝胶 均苯三酚改性 溶胶-凝胶 超临界干燥 

分 类 号：O648[理学—物理化学]