V波段大功率带状注曲折波导行波管  

V-band high-power sheet-beam folded-waveguide traveling-wave tube

作　　者：刘洋[1] 徐进[1] 魏彦玉[1] 赖剑强[1] 许雄[1] 黄明智[1] 唐涛[1] 宫玉彬[1] 

机构地区：[1]电子科技大学微波电真空器件国家重点实验室,成都610054

出　　处：《强激光与粒子束》2012年第11期2698-2702,共5页High Power Laser and Particle Beams

基　　金：国家杰出青年科学基金项目(61125103);中央高校基本科研业务费专项资金项目(ZYGX2009Z003;ZYGX2010J054)

摘　　要：利用曲折波导慢波结构和一个长宽比为3∶1的带状电子注作为注-波互作用电路,完成了对V波段大功率行波管互作用电路的设计。分析了带状电子注通道对高频特性的影响,并在综合考虑色散和耦合阻抗的情况下得到了优化的结构参数。建立了3维的V波段带状注曲折波导行波管的电路模型,并利用CST粒子工作室完成了注-波互作用的仿真研究。研究结果表明,当工作电压和电流分别为17kV和150mA时,带状注曲折波导行波管在58～62GHz时的饱和平均输出功率大于160W,增益大于34.7dB。The interaction circuit for the V-band high-power traveling-wave tube （TWT） was designed by employing the folded-waveguide slow-wave structure and a 3 ： 1 aspect-ratio sheet electron beam as the beam-wave interaction circuit. The effect of the sheet-beam channel on the high frequency properties was analyzed, and the optimized structural parameters were obtained under the consideration of dispersion and impedance. A 3-D circuit model of the sheet-beam folded-waveguide TWT was construc- ted and the beam-wave interaction of this circuit was simulated using the CST particle studio, From our calculations, the sheet- beam folded-waveguide TWT can produce output power of over 160 W with the gain over 34. 7 dB ranging from 58 GHz to 62 GHz, when the cathode voltage and beam current are set to 17 kV and 150 mA respectively.

关 键 词：带状电子注 曲折波导 慢波结构 行波管 

分 类 号：TN124[电子电信—物理电子学]