基于RAFT聚合的蜂窝状有序多孔膜的制备及表征  

Preparation and characterization of honeycomb microporous films based on reversible addition fragmentation chain transfer(RAFT) polymerization

作　　者：王利平[1,2] 吕新虎[2] 李光[2] 邓爱霞[2] 

机构地区：[1]山东大学化学与化工学院,山东济南250100 [2]聊城大学材料科学与工程学院,山东聊城252059

出　　处：《山东大学学报（工学版）》2012年第5期113-117,共5页Journal of Shandong University（Engineering Science）

基　　金：国家自然科学基金资助项目(21203085);山东省中青年科学家科研奖励基金(博士基金)资助项目(BS2011CL011)

摘　　要：以苯乙烯为单体,S,S'-(a,a'-二甲基-a″-乙酸)三硫代碳酸酯(BDAAT)为链转移剂,偶氮二异丁腈(AIBN)为引发剂,进行苯乙烯(St)的可逆加成——断裂链转移(RAFT)自由基聚合,同时以传统的自由基本体聚合方法制备聚苯乙烯(PS)。然后以两种方法制备的PS和聚乙二醇(PEG)为成膜物质,通过水滴模板法在高湿氮气下制备了微观多孔膜。探讨了聚苯乙烯多孔膜的形成机理,研究了聚合方式、聚合物溶液质量分数及溶剂的挥发性等对微观多孔膜结构的影响。研究结果表明,多孔薄膜的形貌受线性聚合物的末端基团以及亲水性物质等综合因素的影响,膜孔径随聚合物溶液质量分数的增大而减小。The polystyrene （PS） was synthesized via reversible addition fragmentation chain transfer （RAPT） radical polymerization using azo-bis-isobutryonitrile （AIBN） as the initiator, （ S, S ） ′-bis （α, α） ＇-dimethyl-α″-acetic acid） （trithiocarbionate） （BDAAT） as the chain transfer agent （CTA）. In addition, the polystyrene （PS） was synthesized by traditional radical bulk polymerization. Under the high humidity and nitrogen conditions, the microporous films were prepared by water drop templated method using polystyrene （PS） and polyethylene glycol （PEG） as materials of the membranes respectively. The mechanism of the formation of PS honeycomb microporous films was discussed. Moreover, the influence of the polymerization manner, the solution concentration, and the volatility of solvents on the structure of the microporous films were also studied. The results showed that the morphology of microporous films was affected by the end group of linear polymer, hydrophilic matter and so on. The diameter of film pore decreased obviously with the increasing of the polymer concentration.

关 键 词：RAFT 微孔膜 聚苯乙烯 水滴模板法 

分 类 号：TS176.9[轻工技术与工程—纺织材料与纺织品设计]