检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:鲁妍[1]
机构地区:[1]秦皇岛职业技术学院机电工程系,河北秦皇岛066100
出 处:《热加工工艺》2012年第20期204-205,共2页Hot Working Technology
摘 要:利用电阻率测试仪测试了深冷处理前后黄铜在25—600℃的电阻率,并探讨了深冷处理对黄铜电阻率的影响。结果表明:深冷处理前后黄铜的电阻率均随温度的升高而增大,当温度低于300℃时,深冷处理后黄铜的电阻率大于深冷处理前的电阻率;高于300℃时,深冷处理后黄铜的电阻率小于深冷处理前的电阻率。Resistivity of brass before and after cryogenic treatment at 25-600 ℃ was measured by resistivity tester. The effects of cryogenic treatment on the resistivity were studied. The results show that the resistivity of brass before and after cryogenic treatment increases with the increase of temperature, when the temperature is below 300 ℃, the resistivity of brass after cryogenic treatment is higher than that of brass before cryogenic treatment, and over 300 ℃, the resistivity of brass after cryogenic treatment is lower than that of brass before cryogenic treatment.
分 类 号:TG156.91[金属学及工艺—热处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.21.163.198