酚醛树脂基板真空热解炭制备高性能活性炭  

Preparation of high quality activated carbon from vacuum pyrolysis residue of phenolic resin laminated board

作　　者：易牡丹[1] 丘克强[1] 

机构地区：[1]中南大学化学化工学院,湖南长沙410083

出　　处：《化工学报》2012年第11期3716-3722,共7页CIESC Journal

基　　金：国家高技术研究发展计划项目(2006AA06Z375)~~

摘　　要：以一种全新的物质——阻燃的FR-1型酚醛树脂电路板基板的真空热解炭渣为原料,采用CO2和KOH活化法制备高性能的活性炭。分别研究了CO2活化法中的活化温度和KOH活化法中的碱炭比对活性炭产品性能的影响。用氮气吸附表征了活性炭的孔结构性质,并检测了产品的亚甲基蓝值和碘值。结果表明,KOH活化所得活性炭有更高的亚甲基蓝值(928.3mg.g-1 vs 231.5mg.g-1)、碘值(2442.2mg.g-1 vs 946.6mg.g-1)、比表面积(2289m2.g-1 vs 1198m2.g-1)和孔体积(1.317cm3.g-1 vs 0.703cm3.g-1)。所得产品均达到国家一级品标准。用这种原料制备高性能活性炭不仅解决了废弃物资源化的问题,还开发出一种新的、廉价的制备高性能活性炭的原料和方法工艺。Vacuum pyrolysis residue of flame retardant FR-1phenolic resin laminated board was used to prepare high quality activated carbons（ACs）by CO2and KOH activation,respectively.The effects of activation temperature by CO2 activation and KOH/char ratio by KOH activation on the properties of obtained ACs were investigated.The pore structures were characterized by N2adsorption.Methylene blue（MB）and iodine（I2）adsorption capacities were also measured.The results showed that ACs obtained by KOH activation had a higher I2adsorption value（2442.2mg.g-1 vs 946.6mg.g-1）,MB adsorption value（928.3mg.g-1 vs 231.5mg.g-1）,specific surface area（2289m2.g-1 vs 1198m2.g-1）,and larger total pore volume（1.317cm3.g-1 vs 0.703cm3.g-1）.All the products reached the national first class standard.A double benefit may be obtained by this study,for it not only achieves the purpose of utilization of pyrolysis residue of waste printed circuit board,but also finds a novel and cheap material for the preparation of high quality ACs.

关 键 词：活性炭 电路板 物理活化法 化学活化法 热解 

分 类 号：TQ424.1[化学工程]