空压机储气罐的埋弧焊  

SAW FOR GAS POT OF AIR COMPRESSOR

作　　者：丁国光 

机构地区：[1]杭州空气压缩机厂

出　　处：《焊接》1990年第2期21-22,共2页Welding & Joining

摘　　要：对于4.5～6mm厚钢板制造的空压机储气罐纵缝和环缝采用自动埋弧焊生产中易产生的焊接缺陷进行了分析并提出了解决措施。The auto-submerged are welding is used for welding girth and longitudinal welds of air compressor storage pot which is made of 4.5～6mm steel plates. Through the analysis for the defects which are easy to occur during weldirg, the method to eliminate them is put forward.

关 键 词：埋弧焊 压力容器 空气压缩机 储气罐 

分 类 号：TB652[一般工业技术—制冷工程] TG457.5[金属学及工艺—焊接]