An approach to calculating allowable watershed pollutant loads  

作　　者：Yu GUO Haifeng JIA 

机构地区：[1]School of Environment,Tsinghua University,Beijing 100084,China [2]Shanghai Urban Planning and Design Research Institute,Shanghai 200040,China

出　　处：《Frontiers of Environmental Science & Engineering》2012年第5期658-671,共14页环境科学与工程前沿（英文）

摘　　要：To improve the management of discharge pollutants loads in the reservoirs＇ watershed, an approach of the allowable pollutants loads calculation and its allocation, based on the water environment model, was proposed. Establishment of the approach framework was described at first. Under the guidance of this framework, two major steps were as follows： modeling and scenario analysis were involved and should be applied to support the decision of discharge loads management; Environ- mental Fluid Dynamic Code （EFDC） model was selected as the kernel model in this framework. In modeling step, spatial discretization for establishing cell map in model, data preprocessing, parameter calibration and uncertainty analysis （which is considered as the significantly relevant factor of the margin of safety （MOS））, were conducted. As a result of the research, the model-based approach presented as a combination of estimation and precise calculation, which contributed to scenario analysis step. Some integrated modules, such as scenario simulation, result analysis and plan optimization were implemented as cycles in the scenario analysis. Finally, allowable pollutant loads under various conditions were calculated. The Chaihe Reservoir in Liaoning Province, China was used as a case study for an application of the approach described above. Results of the Chaihe reservoir water quality simulation, show good agreement with field data and demonstrated that the approach used in the present study provide an efficient and appropriate methodology for pollutant load allocation.To improve the management of discharge pollutants loads in the reservoirs＇ watershed, an approach of the allowable pollutants loads calculation and its allocation, based on the water environment model, was proposed. Establishment of the approach framework was described at first. Under the guidance of this framework, two major steps were as follows： modeling and scenario analysis were involved and should be applied to support the decision of discharge loads management; Environ- mental Fluid Dynamic Code （EFDC） model was selected as the kernel model in this framework. In modeling step, spatial discretization for establishing cell map in model, data preprocessing, parameter calibration and uncertainty analysis （which is considered as the significantly relevant factor of the margin of safety （MOS））, were conducted. As a result of the research, the model-based approach presented as a combination of estimation and precise calculation, which contributed to scenario analysis step. Some integrated modules, such as scenario simulation, result analysis and plan optimization were implemented as cycles in the scenario analysis. Finally, allowable pollutant loads under various conditions were calculated. The Chaihe Reservoir in Liaoning Province, China was used as a case study for an application of the approach described above. Results of the Chaihe reservoir water quality simulation, show good agreement with field data and demonstrated that the approach used in the present study provide an efficient and appropriate methodology for pollutant load allocation.

关 键 词：Source water protection watershed manage-ment pollutants load allocation Environmental FluidDynamic Code （EFDC） modeling margin of safety statistical analysis 

分 类 号：TP242.6[自动化与计算机技术—检测技术与自动化装置] TU831.2[自动化与计算机技术—控制科学与工程]