间歇工作图像胶囊内窥镜的设计与实验  

Design and experiment of intermittent working image capsule endoscopy

作　　者：刘刚[1] 颜国正[1] 刘华[1] 朱柄全[1] 

机构地区：[1]上海交通大学医学精密工程及智能系统研究所,上海200240

出　　处：《光学精密工程》2012年第10期2192-2199,共8页Optics and Precision Engineering

基　　金：国家自然科学基金资助项目(No.31170968);载人航天领域预先研究资助项目(No.010203);上海市科委资助项目(No.09DZ1907400)

摘　　要：针对图像胶囊内窥镜受到能量限制而工作时间较短的问题,基于图像胶囊在人体肠道蠕动的速度设计了一种间歇工作模式的微型化、低功耗图像胶囊内窥镜。采用霍尔开关代替干簧管作为电源总开关,进一步降低了图像胶囊的体积。通过对电池电源模块、模拟开关电路和软件进行设计研究,实现了无线发射和照明电路的间歇供电和图像传感器的间歇休眠。动物实验验证了整个系统的工作时间和可行性。结果表明,整个系统的尺寸仅为Φ12mm×25mm,1s间隔工作模式下系统的工作时间超过9h。Abstract： As the image capsule endoscopy is limited by the energy and it has short working time, this paper designs a miniature intermittent working image capsule endoscopy with low power consuming according to the speed of image capsule＇s peristalsis in human intestine. The Hall switch was designed as the main power supply switch instead of reed switch to further reduce the volume of the image cap- sule. A battery power supplies module, an analog switch circuit, and a software were developed to real- ize the intermittent power supplies of wireless transmitting and Light Emitting Diode（LED） circuits and the sleep mode of an image sensor. The clear images were obtained successfully, and the tests and animal experiments were performed to prove the work time and feasibility of the whole system. Obtained results show that the total size of the system is only Ф12mm× 25 mm, and the work time is more than 9 h in one second intermittent working mode when the modules are connected.

关 键 词：胶囊内窥镜 图像胶囊 模拟开关 间歇供电 休眠 

分 类 号：TH776.1[机械工程—仪器科学与技术]