微带串馈赋形波束阵列天线设计  

Design of Series-Fed Microstrip Arrays with Shaped Beam Pattern

作　　者：周娜[1] 柴舜连[1] 赵菲[1] 齐会颖[1] 刘张博[1] 

机构地区：[1]国防科学技术大学电子科学与工程学院,长沙410073

出　　处：《微波学报》2012年第5期48-51,共4页Journal of Microwaves

摘　　要：利用阵列天线的不均匀性可以实现对辐射单元幅度和相位的控制以达到特殊波束赋形目的。传统设计中,基本没有考虑微带不连续性对微带传输线长度的影响。本文采用仿真方法获得了微带贴片单元的等效参数,综合考虑了微带不连续性对贴片单元长度以及贴片间传输线长度的影响,设计了双层X波段32元串馈矩形微带贴片阵列天线,实现了余割平方赋形波束。运用电磁仿真软件CST对该阵列天线进行仿真,制作了天线实物并进行了实验,结果与预期指标吻合较好。The amplitudes and phases of radiating elements of nonuniform array antenna could be controlled in order to achieve special shaped beam. There was little discussion about the influence of the nonuniformity to the length of microstrip line in the conventional design. In the paper, a simulation method to obtain the equivalent parameters of microstrip patch is presented. Comprehensively considering with nonuniformity＇s effect, a 32 series-fed microstrip antenna array at X band giving the synthesis of a cosecant square pattern is designed. And by use of the software CST, the antenna array is simulated and measured. The results agreed with the requirements.

关 键 词：不均匀性 微带阵列天线 串馈 赋形波束 

分 类 号：TN822[电子电信—信息与通信工程]