半刚接钢框架-钢板剪力墙结构滞回性能的有限元分析  

Finite Element Analysis of Hysteretic Behavior of PR Steel Frame-steel Plate Shear Wall

作　　者：孙国华[1] 顾强[1] 何若全[1] 方有珍[1] 

机构地区：[1]苏州科技学院江苏省结构工程重点实验室,江苏苏州215011

出　　处：《土木建筑与环境工程》2012年第5期70-76,共7页Journal of Civil,Architectural & Environment Engineering

基　　金：国家自然科学基金项目(50978175);江苏省高校自然科学基金项目(10KJB560004)

摘　　要：为研究半刚接钢框架钢板剪力墙结构(Partially-restrained Steel Frame-Steel Plate ShearWall)的抗震性能,利用经试验验证的双向等效拉杆模型分析了低周往复荷载作用下梁柱半刚性连接对强、弱框架SPSW结构滞回性能、承载力、刚度、耗能能力的影响。分析结果表明:SPSW结构的滞回曲线具有双重特征,当周边钢框架较强时,滞回曲线趋于饱满;当内填剪力墙板较强时,滞回曲线趋于捏缩。随着节点抗弯承载力的增加,强、弱框架的SPSW结构的滞回性能趋于饱满,耗能能力增强,水平承载力呈增大趋势,但对强框架SPSW结构的影响程度大于弱框架SPSW结构。节点抗弯承载力对强框架SPSW结构的抗侧刚度影响较大,对弱框架SPSW结构抗侧刚度影响相对较小。In order to investigate the seismic behavior of partially-restrained steel plate shear wall（Steel Plate Shear Wall,SPSW）,the effects of partially-restrained connection on the hysteretic behavior,lateral bearing capacity,stiffness,energy dissipation of SPSW with strong and weak steel frame were simulated under low cyclic loading via equivalent strip model that had been verified by experiment.The results show that hysteretic behavior of SPSW has dual characters.The hysteretic curves of SPSW with strong surrounding steel frame become fat,and the hysteretic curves of SPSW with weak surrounding steel frame become narrow.With the increase of the bending capacity of PR connection,the hysteretic curves of SPSW become fat gradually,and the capacity of energy dissipation and lateral bearing increase.However,the effect on lateral stiffness of PR connection of SPSW with strong steel frame is higher than the one with weak steel frame.

关 键 词：半刚性连接 等效拉杆模型 钢板剪力墙 滞回性能 有限元分析 

分 类 号：TU392.4[建筑科学—结构工程]