反相乳液体系制备及稳定性研究  

Stability and Preparation of Inverse Emulsion

作　　者：宋昭峥[1] 杨军 周书宇[1] 

机构地区：[1]中国石油大学重质油国家重点实验室,北京102249 [2]新疆吐哈甲醇厂,新疆鄯善838202

出　　处：《石油化工高等学校学报》2012年第5期44-47,共4页Journal of Petrochemical Universities

基　　金：国家高技术研究发展计划(863计划)资助项目(2007AA06Z201);中国石油大学(北京)基础科研基金资助项目(01JB0171)

摘　　要：反相乳液聚合是近年发展较快的一种聚合方法,具有聚合速率高、高度分散、大小均一等突出优点。以Tween60与Span80为复合乳化剂制备了W/O型反相乳液体系。考察了乳化转速、时间、乳化剂的HLB值和质量分数以及油水体积比对乳液类型和稳定性的影响。由实验确定了反相乳液的最优条件:转速为14 000r/min,乳化时间35min,乳化剂HLB值为5.0,油水体积比为1:1,乳化剂质量分数为4%时,可形成较为稳定的W/O型乳液。同时,结合实验结果对部分稳定机理进行了分析。Inverse emulsion polymerization is developing rapidly in recent years. The polymerization method has the following advantages, such as high polymerization rate, a highly decentralized and uniform size of polymerization particles. The water-- oil inverse emulsion was prepared with the compounds of Span80 and Tween60 as emulsifier. It was investigated by way of electric conductivity that the types and stability of the inverse emulsion was affected by many kinds of factors such as emulsification time, rotate speed, HLB value and emulsifier concentration, ratio of oil to water, and the optimum conditions for forming stable water--oil inverse emulsion were attained as the emulsification time about 35 minutes, the rotate speed on 14 000 r/min, HLB value of mixed emulsifier at 5.0, the mass ratio of oil to water in 1 ： 1, and the content of the mixed emulsifier at 4%. Based on the experimental results, some aspects of the stability mechanism were explained.

关 键 词：反相乳液 稳定性 电导率 最优条件 

分 类 号：TE357[石油与天然气工程—油气田开发工程] TQ027[化学工程]