复杂薄壁铸件反重力铸造工艺研究  

Production of Complex Thin-walled Aluminum Alloy Castings by Counter-gravity Casting

作　　者：潘俊杰[1] 洪润洲[1] 王建国[1] 

机构地区：[1]北京航空材料研究院

出　　处：《特种铸造及有色合金》2012年第10期893-894,共2页Special Casting & Nonferrous Alloys

摘　　要：以复杂薄壁铝合金铸件下基座为研究对象,对比了调压铸造技术与真空吸铸技术的铸件成形与熔炼情况。结果表明,采用树脂砂型精密铸造与调压铸造技术相结合的方法,当充型速度为60mm/s、浇注温度为720℃时,可成功铸出复杂薄壁铸件——下基座。Complex thin-walled aluminum alloy bottom-base was produced by adjusted pressure casting and by vacuum suction casting, respectively. The castings formation and alloy melting were analyzed comparatively. The results reveal that the complex thin-walled aluminum alloy bottom-base can be produced successfully with filling velocity of 60 mm/s and pouring at 720 ℃ by resin sand mold combining with adjusted pressure casting

关 键 词：调压铸造 真空吸铸 反重力铸造 复杂薄壁件 

分 类 号：TG249.9[金属学及工艺—铸造]