检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:邹良浩[1] 梁枢果[1] 汪大海[2] 熊铁华[1]
机构地区:[1]武汉大学土木建筑工程学院,湖北武汉430072 [2]武汉理工大学土木工程与建筑学院,湖北武汉430070
出 处:《建筑结构学报》2012年第11期27-35,共9页Journal of Building Structures
基 金:国家自然科学基金项目(90715023;51008240)
摘 要:基于刚性模型表面测压风洞试验建立高层建筑三维风荷载模型,进而运用振型加速度法求解风振响应动力方程,得到了包含拟静力项和惯性力项的弹性力响应解,并推导了对称截面高层建筑顺风向、横风向和扭转向风致随机内力响应。在此基础上提出了基于内力响应等效的可考虑高阶振型贡献的对称截面高层建筑顺风向、横风向和扭转向等效静力风荷载计算方法。结合某一对称截面高层建筑工程实例,对采用上述方法计算得到的结构三维等效静力风荷载进行分析并与我国规范方法顺风向等效静力风荷载计算结果进行比较。结果表明,高层建筑结构抗风设计应该考虑三维等效静力风荷载,且二阶振型对高层建筑等效静力风荷载的贡献不可忽视。Based on synchronous surface pressure scanning of rigid model in wind tunnel test, three dimensional wind load models of high-rise buildings were obtained. Furthermore, the random internal force responses of buildings in along-wind, across-wind and torsional directions were obtained by applying modal acceleration method, which express the restoring force solution in terms of quasi-static force item and inertia force item. Accordingly the calculation methods of equivalent static wind loads, in which the contributions of the higher mode can be considered, of symmetrical high-rise buildings in along-wind, across-wind and torsional directions were deduced based on internal forces equivalence. Finally by analyzing the three dimensional equivalent static wind loads of an actual symmetrical high-rise buildings obtained by this method, and comparing with the along-wind equivalent static wind loads obtained by the national load code, it is indicated that three dimensional equivalent static wind loads should be considered for the wind resistant design of high-rise buildings, and that the contributions of the second mode to the equivalent static wind loads of high-rise buildings cannot be neglected.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38