A fast explicit finite difference method for determination of wellhead injection pressure  

作　　者：白冰 李小春 刘明泽 石露 李琦 

机构地区：[1]State Key Laboratory of Geomechanics and Geotechnical Engineering(Institute of Rock and Soil Mechanics,Chinese Academy of Sciences)

出　　处：《Journal of Central South University》2012年第11期3266-3272,共7页中南大学学报（英文版）

基　　金：Project(Z110803)supported by the State Key Laboratory of Geomechanics and Geotechnical Engineering,China;Project(2008AA062303)supported by the National High Technology Research and Development Program of China

摘　　要：A fast explicit finite difference method (FEFDM),derived from the differential equations of one-dimensional steady pipe flow,was presented for calculation of wellhead injection pressure.Recalculation with a traditional numerical method of the same equations corroborates well the reliability and rate of FEFDM.Moreover,a flow rate estimate method was developed for the project whose injection rate has not been clearly determined.A wellhead pressure regime determined by this method was successfully applied to the trial injection operations in Shihezi formation of Shenhua CCS Project,which is a good practice verification of FEFDM.At last,this method was used to evaluate the effect of friction and acceleration terms on the flow equation on the wellhead pressure.The result shows that for deep wellbore,the friction term can be omitted when flow rate is low and in a wide range of velocity the acceleration term can always be deleted.It is also shown that with flow rate increasing,the friction term can no longer be neglected.A fast explicit finite difference method （FEFDM）, derived from the differential equations of one-dimensional steady pipe flow, was presented for calculation of wellhead injection pressure. Recalculation with a traditional numerical method of the same equations corroborates well the reliability and rate of FEFDM. Moreover, a flow rate estimate method was developed for the project whose injection rate has not been clearly determined. A wellhead pressure regime determined by this method was successfully applied to the trial injection operations in Shihezi formation of Shenhua CCS Project, which is a good practice verification of FEFDM. At last, this method was used to evaluate the effect of friction and acceleration terms on the flow equation on the wellhead pressure. The result shows that for deep wellbore, the friction term can be omitted when flow rate is low and in a wide range of velocity the acceleration term can always be deleted. It is also shown that with flow rate increasing, the friction term can no longer be neglected.

关 键 词：wellhead pressure injection pressure bottom-hole pressure fast explicit finite difference method 

分 类 号：TU43[建筑科学—岩土工程]