应用涡轮流量计测量油水两相混合流量  

Measurement of the Mixture Flow Rate of Oil-Water Two-Phase Flow Using the Turbine Flow-Meter

作　　者：丰飞飞[1] 李东晖[1] 许晶禹[1] 吴应湘[1] 

机构地区：[1]中国科学院力学研究所,流固耦合系统力学重点实验室,北京100190

出　　处：《中国造船》2012年第A02期249-254,共6页Shipbuilding of China

基　　金：中国科学院知识创新工程方向性基金资助项目(编号:KJCX2-YW-L02);国家自然基金面上项目(编号:10572143)

摘　　要：应用涡轮流量计测量油水两相流混合流量,重点研究油相粘度和入口相含率对测量精度的影响。通过试验给出了测量误差随油相粘度和入口相含率变化的试验曲线图.结果表明:油相粘度和入口相含率对测量误差有显著的影响,特别是油相粘度较高时。In this work, the mixture flow rate of oil-water flows was studied using the turbine flow-meter. The research focuses on the effect of oil viscosity and input oil fraction on the precision of the meter. It is shown that oil viscosity and input oil fraction exert a remarkable effect on measured errors, especially when oil viscosity is high.

关 键 词：油水两相流 涡轮流量计 粘度 相含率 

分 类 号：TQ051.72[化学工程]