注射成型过程中复合材料在型腔内流动行为的可视化实验  

Visualization Experiment of the Filling Behavior of Composite Materials During Injection Molding Process

作　　者：姜开宇[1] 段飞[1] 田净娜[1] 王敏杰[1] 

机构地区：[1]大连理工大学模塑制品教育部工程研究中心,辽宁大连116023

出　　处：《高分子材料科学与工程》2012年第11期129-132,共4页Polymer Materials Science & Engineering

基　　金：中央高校基本科研业务费专项资金(DUT11ZD(G)05);教育部留学回国人员科研启动基金资助(教外司留[2008]890)

摘　　要：利用可视化手段对不同纤维含量热塑性复合材料不同型腔厚度的充填过程进行了动态观察,实验结果表明,尺寸及材料特性对薄壁塑件的熔体流动行为有较大影响,随着壁厚的减薄,复合材料在低速注射条件下熔体充填型腔的速度在后期有突然增大的现象,在高速注射条件下,熔体充填速度会迅速下降,而纤维含量较高的复合材料由于剪切热的作用充填速度下降较小。该研究为薄壁热塑性复合材料注塑成形技术的深入研究提供了参考。Visual technology was applied to observe the dynamic filling process of thern：oplastic composite materials with different contents of fiber in the different cavity thickness mold. It is indicated that the melt＇ s filling behavior of thin-wall plastics is greatly influenced by both scale and the material variety. As the reducing of cavity thickness, ：he melt＇s filling speed of composite materials in the cavity increases suddenly at the end of filling process on the condition of the low injecting speed. Regarding the high injecting speed, the mel：＇s filling speed falls down rapidly, but the rate of descend is lower due to the shear heat of composite materials with the higher content of fibers. The research can provide experiment evidence for the in-depth study on the injecting molding technology of thermoplastic composite materials.

关 键 词：注塑成形 复合材料 可视化 

分 类 号：TQ320.662[化学工程—合成树脂塑料工业]