激光冲击处理不锈钢及镍基合金后表面力学性能的研究  

Study of Surface Mechanical Properties of Laser Shock Processed Austenitic Steel and Ni-based Superalloy

作　　者：王华明[1] 李晓轩[1] 孙锡军 于利根[1] 王健[2] 邹世坤[2] 

机构地区：[1]北京航空航天大学激光材料加工与表面工程实验室,北京100083 [2]北京航空工艺研究所,北京100024

出　　处：《中国激光》2000年第8期756-760,共5页Chinese Journal of Lasers

摘　　要：利用激光冲击强化技术分别对奥氏体不锈钢 1Cr18Ni9Ti和镍基高温合金 GH30进行了表面强化处理 ,观察了激光表面强化处理后 1Cr18Ni9Ti和 GH30显微组织与结构的变化 ,测定了1Cr18Ni9Ti和 GH30的显微硬度和残余应力 .结果表明 ,激光表面强化处理后的 1Cr18Ni9Ti和GH30冲击区微观结构中出现很高的位错密度和大量的孪晶 ,冲击区的显微硬度得到较大提高 ,冲击区表面获得了较高的残余压应力 . 1Cr18Ni9Ti冲击区还发生了形变诱发马氏体相变 .The effect of laser shock processing on the microstructure, hardness and residual stress of an austenitic steel 1Cr18Ni9Ti and a Ni base superalloy GH30 is studied as a functions of laser shock processing variables. Results show that high density of dislocations and deformation twins are produced in the laser shock processed zone of both the austenitic steel 1Cr18Ni9Ti and the nickel based superalloy GH30. Extensive strain induced martensite plates are also observed in the laser shock processed zone of the austenitic steel surface. The hardness and compressive stress of the laser shock processed surface are significantly increased for both of the test materials.

关 键 词：激光冲击 不锈钢 镍基高温合金 表面力学性能 

分 类 号：TN249[电子电信—物理电子学]