检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:曾广胜[1,2] 林瑞珍[1,2] 郑良杰[1,3] 陈磊[1,2] 孟聪[1,2]
机构地区:[1]湖南工业大学包装新材料与技术中国包装总公司重点实验室,湖南株洲412008 [2]湖南工业大学先进包装材料与技术湖南省普通高校重点实验室,湖南株洲412008 [3]广西大学有色金属及材料加工新技术国家重点实验室,广西南宁530000
出 处:《功能材料》2012年第22期3054-3057,共4页Journal of Functional Materials
基 金:国家自然科学基金资助项目(61174100);湖南省科技厅科技计划资助项目(2010JT4039)
摘 要:以NH4HCO3为发泡剂,废纸浆纤维为增强体,玉米淀粉、PVA为基质,甘油和尿素作为复合增塑剂,辅以其它的各种助剂,利用挤出发泡法制备出一种可生物降解的复合发泡材料。并分别讨论该发泡材料的密度、发泡倍率、吸水性、回弹性以及泡孔形态。研究结果显示,材料的密度随着发泡剂含量的增加先减少后增加,当发泡剂含量为1.2%时,材料的密度最小为0.16g/cm3;发泡倍率、吸水率、线性尺寸变化量均随着发泡剂含量的增加先增加后减少,且在发泡剂含量为1.2%时,均达到最大值;随着发泡剂含量的增加,材料泡孔数量先增加后减少,孔径逐渐增大;当废纸浆含量为20%时,材料的泡孔数量多,孔径较小且分布比较均匀;当复合增塑剂含量为30%时,淀粉与废纸浆相容性较好,材料泡孔数量较多,且泡孔大小分布均匀。The foamed composite could be completely biodegradable which was mainly prepared by corn starch and PVA, reinforced by waste pulp paper, foamed by NH4 HCO3 ,plasticized by the mixed plasticizer of glycerol/urea and other adjuvants by extrusion foaming method. Then, the foamed composites' density, foam expansion ratio, water absorbability, rebound rate, cell morphology and the effect of mixed plasticizer on the plastication of cornstarch were discussed. The results showed that the density decreased with increasing NH4 HCO3 content, then increasing. When the content of NH4 HC():~ was 1, 2~//oo, the composite had the lowest value which was 0.16 g/cma. The foam expansion ratio, water absorption rate and increase in length were all increasing with increasing NH4HC()a content, then decreasing. When the content of NH, HCO3 was 1.2~, they had the highest values. The number of cell firstly increased with increasing NH~ HCOa content, then decreasing. The side of cell became larger with increasing content of NH.~ HCO:~. When waste pulp paper content was 20~/oo, the number of cell was most and the side of cell was small and distributed well. When mixed plasticizer content was 30 %, starch and waste pulp paper had good compatibility, the number of cell was more and the side of cell distributed well.
分 类 号:TQ321.5[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.43