常州市江边污水厂三期工程的设计与运行  

Design and Operation of Third-stage Project of Changzhou Jiangbian Wastewater Treatment Plant

作　　者：戴罗平 张丹 耿锋 刘科军 

机构地区：[1]常州市市政工程设计研究院有限公司,江苏常州213003

出　　处：《中国给水排水》2012年第22期62-66,共5页China Water & Wastewater

摘　　要：常州市江边污水处理厂三期工程扩建规模为10×104m3/d,采用水解酸化/氧化沟A2O/高效沉淀池/V型滤池工艺,出水水质达到《城镇污水处理厂污染物排放标准》(GB 18918—2002)的一级A标准。介绍了工艺流程、设计参数、设备配置情况及项目投资,并对设计中采用的新技术、新理念进行了总结。The capacity of the third-stage project of Changzhou Jiangbian Wastewater Treatment Plant was 10 ×10^4m^3/d, the hydrolytic acidifieation/A2o oxidation ditch/high-efficiency settling tank/ V-type filter process was used, and the effluent quality met the requirement of the first level A criteria specified in Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant （ GB 18918 - 2002）. The treatment process, design parameters, equipment allocation and investment were introduced, and new technologies and concepts in the design were also summarized.

关 键 词：污水处理厂 氧化沟A2O 周进周出辐流沉淀池 

分 类 号：X703[环境科学与工程—环境工程]