High temperature tensile properties of laser butt-welded plate of Inconel 718 superalloy with ultra-fine grains  

超细晶Inconel 718合金激光对接板的高温拉伸性能(英文)

作　　者：曲凤盛[1] 刘旭光[1] 邢飞[1] 张凯锋[2] 

机构地区：[1]重庆大学材料科学与工程学院,重庆400044 [2]哈尔滨工业大学材料科学与工程学院,哈尔滨150001

出　　处：《Transactions of Nonferrous Metals Society of China》2012年第10期2379-2388,共10页中国有色金属学报（英文版）

基　　金：Project(20102302120002)supported by the Research Fund for the Doctoral Program of Higher Education of China

摘　　要：For successfully forming multi-sheet cylinder sandwich structure of Inconel 718 superalloy, high temperature tensile properties of laser butt-welded plate of Inconel 718 superalloy were studied. The experiment results show that tensile direction has great effect on elongation of the laser butt-welded plate. Under conditions of transverse direction tension, the maximum elongation reaches 458.56% at 950 °C with strain rate of 3.1-10-4 s-1, in which the strain rate sensitivity value m is 0.352 and the welding seam is not deformed. Under conditions of longitudinal direction tension, the maximum elongation is 178.96% at 965 °C with strain rate of 6.2-10-4 s-1, in which m-value is 0.261, and the welding seam contributes to the deformation with the matrix. The microstructure in as-welded fusion zone is constituted of austenite dendrites and Laves phase precipitated in interdendrites. After longitudinal direction tension, a mixed microstructure with dendrite and equiaxed crystal appears in the welding seam due to dynamic recrystallization. After high temperature deforming, many δ-phase grains are transformed from Laves phase grains but a small part of residual Laves phase grains still exist in the welding seam. The deformation result of multi-sheet cylinder sandwich structure verifies that high temperature plasticity of the laser butt-welded plate can meet the requirement of superplastic forming.为使Inconel 718合金的筒形多层夹芯结构顺利成形,研究该合金激光对接板的高温塑性。结果表明,拉伸方向对激光对接板的伸长率有很大影响。横向拉伸时,在温度为950°C和应变率为3.1×10-4s-1的条件下,最大伸长率为458.56%,此时m值为0.352,焊缝未变形。纵向拉伸时,在温度为965°C和应变速率为6.2×10-4s-1的条件下,最大延长率为178.96%,此时m值为0.261,焊缝随母材同时变形,焊缝的微观组织为树枝晶,晶间析出了Nb含量较高的Laves相。纵向拉伸时,由于动态再结晶的缘故,焊缝中出现了由树枝晶和等轴晶组成的混合组织。高温变形后,焊缝中的大量Laves相转化为δ相,但焊缝中仍有小部分残余的Laves相存在。多层夹芯筒结构成形的结果表明,激光对焊板的高温塑性能满足其筒形夹芯结构的要求。

关 键 词：Inconel 718 alloy laser welding high temperature plasticity microstructure 

分 类 号：TG457.5[金属学及工艺—焊接]