检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:毕晓玲[1,2,3] 李小娟[1,2,3] 胡卓玮[1,2,3] 赖晗[4]
机构地区:[1]三维信息获取与应用教育部重点实验室,北京100048 [2]资源环境与地理信息系统北京市重点实验室,北京100048 [3]首都师范大学资源环境与旅游学院,北京100048 [4]中国矿业大学地球科学与测绘工程学院,北京100083
出 处:《测绘科学》2012年第6期150-152,188,共4页Science of Surveying and Mapping
基 金:国家科技支撑项目(2008BAK49B07;2007BAH15B02)
摘 要:本文以四川省为研究区,基于SRTM数据和GDEM数据,选取5种不同网格尺寸提取坡度、坡向、剖面曲率、平面曲率和地表粗糙度等地形因子,比较DEM网格尺寸变化对提取的地形因子计算结果的误差。研究表明,DEM网格尺寸的增大增加了DEM对地形信息的概括,提取的地形因子准确性降低;但是网格尺寸如果过小,会导致数据量快速增大,浪费大量时间和计算机资源。所以在生产实践中,应综合考虑多种因素选择适宜的网格尺寸。The paper based on the SRTM data and GDEM data, took Sichuan Province as study area, and extracted topographical factors such as slope, aspect, profile curvature, plane curvature and surface roughness from DEM which were five different grid sizes, then compared the errors of topographical factors produced by different grid sizes. The research showed that the larger the grid size was, the simpler the expression of topographic information and the lower accuracy were. ff the grid size was too small, the amount of data would increase rapidly, which was a waste of time and computer resources. As a result, in the production practice many factors should be considered to choose the appropriate grid size.
分 类 号:P231.5[天文地球—摄影测量与遥感]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249