铝型材表面处理废水处理与回用的试验研究  

Study on the treatment and reclamation of aluminum profile anodizing line wastewater

作　　者：李萍[1] 管秀娟[1] 李婷[1] 

机构地区：[1]广东工业大学环境科学与工程学院,广东广州510006

出　　处：《工业水处理》2012年第11期62-64,共3页Industrial Water Treatment

摘　　要：采用混凝+微滤膜组合工艺处理与回用铝型材表面处理废水,考察了对废水中主要污染物Al3+、SO42-及浊度的去除效率以及出水回用于脱脂、碱蚀、中和、氧化等工序水洗的可行性。组合工艺稳定运行2周,尽管进水水质变化较大,但出水浊度稳定在10 NTU左右,Al3+和SO42-质量浓度稳定在8 mg/L和1 000 mg/L左右,出水水质完全可满足脱脂、碱蚀、中和、氧化等工序后水洗环节的用水要求。The combined process of coagulation＋micro-filtration membrane separation （C＋MFMS） has been used for treating aluminum profile anodizing line wastewater. The removing efficiencies of main pollutants, such as Al3＋ and SO4^2- and turbidity are investigated. The feasibility of effluent reused in solvent degreasing,alkali corrosion, neutrali- zation,anodizing etc. is analyzed. During the two week stable operation stage,though the influent water quality changes greatly, the effluent turbidity stabilizes at 10 NTU, and the concentration of A13＋ and SO4^2-can be stabilized at 8 mg/L and 1 000 mg/L respectively. The water quality of effluent can meet water-wash treatment requirements of solvent degreasing, alkali corrosion, neutralization, anodizing etc. process.

关 键 词：混凝 膜分离技术 膜污染 铝型材 

分 类 号：X703[环境科学与工程—环境工程]