检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:叶献国[1,2] 于文静[1] 蒋庆[1] 种迅[1] 黄小坤[3] 刘刚[3]
机构地区:[1]合肥工业大学土木与水利工程学院,合肥230009 [2]安徽土木工程结构与材料省级实验室,合肥230009 [3]中国建筑科学研究院,北京100013
出 处:《工业建筑》2012年第11期11-15,共5页Industrial Construction
基 金:"十一五"国家科技支撑课题(2008BAE61B05-04)
摘 要:为了研究高强钢筋高强混凝土无腹筋梁抗剪性能,进行了6根不同剪跨比梁在集中荷载下抗剪性能试验。观察了试件从裂缝出现到失去承载力全过程的试验现象,分析了试件在各级荷载下的纵筋应变值、挠度值以及抗剪承载力。将抗剪强度试验结果与GB 50010—2010《混凝土结构设计规范》计算结果进行了比较分析,结果表明:借用GB 50010—2010公式计算小剪跨比和大剪跨比的无腹筋双高钢筋混凝土试件梁抗剪强度与实测抗剪强度出入较大。In order to study the shear performance of high-strength concrete and HRBF500 steel beams without web reinforcement, 6 beams with different shear span ratio were tested under the concentrated load. The whole process from the appearance of cracks to breakage of the beams was observed, the strain of main reinforcement, deflection and shear capaeity were analyzed. Then, the test results were compared with the shear strengths predicted by the code (GB 50010 -2010). The results showed that the shear strengths of beams of smaller span-to-depth ratios and larger span-to-depth ratios significantly differed between calculation results and the experimental results.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:52.14.133.33