夹具拘束距离对Hastelloy C-276薄板脉冲激光焊接变形的影响  

Influence of fixture restraint distance on pulsed laser welding distortion of Hastelloy C-276 thin sheet

作　　者：郭玉泉[1] 吴东江[1] 马广义[1] 杨义彬[1] 佟宇[1] 郭东明[1] 

机构地区：[1]大连理工大学精密与特种加工教育部重点实验室,辽宁大连116024

出　　处：《光学精密工程》2012年第11期2465-2471,共7页Optics and Precision Engineering

基　　金：国家973重点基础研究发展计划资助项目(No.2009CB724307)

摘　　要：为了揭示夹具拘束距离对0.5mm厚Hastelloy C-276薄板脉冲激光焊接变形的影响,基于有限元软件ANSYS建立了三维热力耦合有限元模型。采用位移约束假设代替实际夹具的拘束作用,研究了夹具拘束距离对Hastelloy C-276薄板焊接纵向挠曲变形及横向收缩变形的影响规律。实验测量了焊接热循环曲线和残余变形,验证了所建立有限元模型的可靠性。模拟结果表明,随着夹具拘束距离从8mm增加到20mm,焊接纵向挠曲变形及横向收缩变形均表现为近似线性增大的趋势,特别是焊接横向收缩变形增加了将近3.6倍,而减小夹具拘束距离可以控制焊接残余变形。该模型较准确地模拟了薄板脉冲激光焊接温度场及残余变形,为抑制薄板焊接变形提供了理论和实验依据。A three-dimensional thermal-mechanical Finite Element Model （FEM） was established by the ANSYS code to reveal the influence of fixture restraint distance on Pulsed Laser Welding （PLW） distortion of Hastelloy C-276 thin sheet with a thickness of 0.5 ram. The influence laws of the re- straint distance on welding longitudinal deflection and transverse shrinkage distortion were investiga- ted by using the displacement restriction assumption instead of the actual restraint condition. Experi- ments were carried out to measure the welding thermal cycle curves and residual distortions. The sim- ulation results are in good agreement with that of the corresponding experiment, which validates the reliability of the FEM. It shows that the welding longitudinal deflection and transverse shrinkage dis- tortion increase linearly with the restraint distance increasing from 8 mm to 20 mm, especially the welding transverse shrinkage distortion increases by nearly 3.6 times. Furthermore, the welding re-sidual distortions can be controlled by reducing the restraint distance. Results dennonstrate that the FEM can simulate accurately the temperature field and the residual distortion of PLW and can provide theoretical and experimental basis for suppression of the welding distortion of thin sheets.

关 键 词：激光技术 脉冲激光焊接 数值模拟 焊接变形 HASTELLOY C-276合金 塑性应变 

分 类 号：TG456.7[金属学及工艺—焊接]