玻璃纤维改性尼龙6性能的研究  

Study on Properties of Nylon 6 Modified by Glass Fiber

作　　者：杨旭宇[1] 

机构地区：[1]湖北汽车工业学院材料工程系,湖北十堰420000

出　　处：《塑料科技》2012年第12期55-58,共4页Plastics Science and Technology

摘　　要：采用硅烷偶联剂KH550处理玻璃纤维,通过熔融共混法制备了尼龙6(PA6)/玻璃纤维(GF)复合材料,对复合材料表面处理前后的力学性能、熔体流动速率(MFR)和断面形貌进行了表征。结果表明:随着GF含量的增加,PA6/GF复合材料拉伸强度和缺口冲击强度均先增大后减小;添加同样含量的GF时,采用偶联剂处理后PA6/GF的拉伸强度和缺口冲击强度增大,MFR减小,扫描电镜观察结果表明,偶联剂KH550有效地改善了GF与PA6间的界面结合。The silane coupling agent KH550 was used to modify glass fiber （GF）, and the GF/PA6 composites were prepared by melt blending method, and the mechanical properties, melt flow rate（MFR） and fracture surface morphology of PA6/GF composites before and after surface treatment were characterized. The results show that： the tensile strength and the notched impact strength of the PA6/GF increase firstly and then decrease lately with the increase of GF content. With the same content of GF, the tensile strength and the notched impact strength of PA6/GF increase, but MFR decreases when GF is treated by KH550. Scanning electron microscopy （SEM） shows that the interface bonding between GF and PA6 improves effectively.

关 键 词：尼龙6 玻璃纤维 性能 改性 

分 类 号：TQ323.6[化学工程—合成树脂塑料工业]