钢包烘烤器燃烧特性的数值模拟与优化研究  

Numerical simulation and optimization research of combustion characteristics of the ladle baking equipment

作　　者：季乐乐[1,2] 贺东风[1,2] 徐安军[1,2] 汪红兵[3] 田乃媛[1,2] 

机构地区：[1]北京科技大学钢铁冶金新技术国家重点实验室,北京100083 [2]北京科技大学冶金与生态工程学院,北京100083 [3]北京科技大学计算机与通讯工程学院,北京100083

出　　处：《炼钢》2012年第6期70-74,共5页Steelmaking

基　　金："十一五"国家科技支撑计划资助项目(2006BAE03A07);中央高校基本科研业务费专项资金资助项目(FRF-BR-10-027B)

摘　　要：利用商业软件Fluent,采用有限差分方法和修正的速度-压力耦合算法Simplec,对钢包烘烤过程的流动、燃烧、传热现象进行数值模拟与优化研究,定量分析了空燃比、空气预热温度、煤气流量等烘烤工艺参数对钢包内温度分布的影响。结果表明,保持空燃比4∶1,增加煤气流量和空气预热温度是提高钢包烘烤温度的有效措施,这将对指导现场生产有重要的意义。模拟计算结果与现场工况实测结果基本吻合。Using commercial soft Fluent, and finite difference and Simplec methods, nu- merical simulation and optimization research of gas flow, combustion and heat transfer in ladle during the baking process has been carried out. The influences of air-fuel ratio, preheated air temperature and gas flux on the temperature distribution of ladle are quan- titatively analyzed. Results show that when the air-fuel ratio is four, raising the flux of gas appropriately and preheated air temperature are effective measures to obtain the bet- ter baking temperature of the ladle. It is of great importance to guide the practical pro- duction. The simulation results are basically consistent with the measured ones.

关 键 词：钢包 烘烤 燃烧 数值模拟 优化研究 

分 类 号：TF341.9[冶金工程—冶金机械及自动化]