冰箱上、下梁冲压工艺改进及多工位传递模设计  

Process improvement of stamping for refrigerator beam and design of multi-position transferring die

作　　者：吴裕农[1] 杨亘[1] 袁根华[2] 

机构地区：[1]顺德职业技术学院机电工程系,广东佛山528333 [2]广州工程技术职业学院机电工程系,广东广州510075

出　　处：《锻压技术》2012年第6期91-95,共5页Forging & Stamping Technology

基　　金：广东省教育部产学研项目(2010B090400094)

摘　　要：分析了冰箱上、下梁现有冲压工艺,比较了3种工艺改进方案,提出采用多工位传递模代替单工序模冲压,设计了多工位传递模冲压排样图。为解决模具能在水平方向完成管夹槽的成形,而步进时又能够顺利脱离模具准确传递的问题,模具结构设计中采用了4种滑块结构。该模具已投入生产使用,工作稳定,制件质量符合要求。The stamping process of refrigerator up-beam and lower-beam was analyzed, three kinds of process improve- ment schemes were compared, therefore the multi-position transferring process was proposed, the layout of multi-posi- tion transferring die was also designed. The tube-nip-slot was formed in horizontal direction, meanwhile the work piece should be pushed out from one step to next step smoothly and accurately without blocking. In order to solve this prob- lem, four kinds of slider structures were applied in this mould. The actual production shows that the mold works in stable condition and the produced part quality meets the requirement.

关 键 词：冲压 多工位传递模 滑块结构 

分 类 号：TG386[金属学及工艺—金属压力加工]