玻璃纤维化学镀铜工艺新探  

New Exploration of Electroless Copper Plating Technology for Glass Fibers

作　　者：左建东[1] 罗超云[2] 杨清曼[1] 吴佳文[1] 

机构地区：[1]深圳大学,材料学院,深圳市特种功能材料重点实验室,广东深圳518055 [2]深圳职业技术学院,化学与生物技术学院,广东深圳518053

出　　处：《塑料》2012年第6期54-56,共3页Plastics

基　　金：深圳市科技计划项目基础研究项目(JC200903130330A)

摘　　要：通过清洗、粗化、活化等工艺对玻璃纤维进行化学镀前处理,对比不同前处理工艺的两种金属化玻璃纤维的金属镀层和导电性,并讨论化学镀液配方对镀层铜含量、导电性及稳定性的影响。结果表明:前处理工艺B得到的玻纤金属铜含量较高,当硫酸铜浓度为0.06 mol/L、甲醛浓度为0.1 mol/L、EDTA浓度为0.15 mol/L时得到的镀铜玻璃纤维的体积电阻率可达3.43×10-5Ω.cm。Glass fibers were handled by cleaning, coarseness and activation technology before chemical plating. Metal content and conductivity of two kinds of metaled glass fibers handled by two kinds of pretreatment technology were compared. Effect of the formula of chemical plating solution on the copper content and conductivity of coating were discussed. The results showed that the copper content of metaled glass fibers handled by technology B before chemical plating was higher than that of technology A. When the content of cupric sulfate 0.06 mol/L,the content of formaldehyde 0. 1 mol/L and the content of EDTA 0. 15 mol/L,the volume resistivity of chemical copper-plating glass fibers could achieve 3.43×10^-5Ω·cm.

关 键 词：玻璃纤维 化学镀 前处理 铜含量 体积电阻率 

分 类 号：TQ327.1[化学工程—合成树脂塑料工业]