半干法脱硫灰的催化氧化研究  

Study on Catalytic Oxidation of Semi-dry Desulfurization Ash

作　　者：高孝钱[1] 朱波青[1] 吴小俊[1] 刘欣[1] 郑翠红[1] 

机构地区：[1]安徽工业大学材料科学与工程学院,安徽马鞍山243002

出　　处：《化工时刊》2012年第10期1-3,23,共4页Chemical Industry Times

摘　　要：采用(NH4)2S2O8为氧化剂,对烧结脱硫灰中CaSO3进行催化氧化研究,研究氧化剂的量、催化剂种类、反应时间、反应温度及(NH4)2SO4的添加量等因素对亚硫酸钙的转化率的影响。实验结果表明,CuSO4催化效果最佳;反应温度越高,CaSO3的氧化率越高;少量(NH4)2SO4明显增加CaSO3的氧化率。当CaSO3与(NH4)2S2O8物质量比为20∶1时,加入的(NH4)2SO4占脱硫灰重量0.2%,以CuSO4作为催化剂,40℃中反应1 h,CaSO3的氧化率达到50%以上。In rization ash, using this paper, a catalytic oxidation route is adopted to oxidize CaSO3 contained in a sintered desulfu-（NH4）2S2O8 as oxidant. Some critical factors influencing the oxidation efficiency of CaSO3 has been investigated, including the quantity of oxidant, the categories of catalysts, the reaction time, the reaction tem-perature and the amount of （NH4 ）2SO4 added. The results are as follows： CuSO4 as catalyst exhibits the highest cata- lytic efficiency; the elevated reaction temperature is beneficial to promoting the oxidation of CaSO3 ; a small amount of the additive （NH4 ）2SO4 can significantly increase the oxidation rate of CaSO3. The oxidation efficiency of CaSO3 ap-proaches above 50% when controlling the molar ratio of CaSO3 to （NH4）2S2O8 to be 20： 1, the content of the added （NH4）2SO4 to be 0.2 wt % , the reaction time to be 1 h, the reaction temperature to be 40 .q C, and using the Cu- SO4 as catalyst.

关 键 词：半干法脱硫灰 亚硫酸钙 催化氧化 

分 类 号：X701.3[环境科学与工程—环境工程]