含粗骨料的超高性能混凝土抗压强度的影响因素  

Factors Influencing Compressive Strength of Ultra-high-performance Concrete with Coarse Aggregate

作　　者：朋改非[1] 杨娟[1] 高育欣[2] 王斌[2] 

机构地区：[1]北京交通大学土木建筑工程学院,北京100044 [2]中建商品混凝土有限公司成都分公司,四川成都610017

出　　处：《华北水利水电学院学报》2012年第6期5-9,共5页North China Institute of Water Conservancy and Hydroelectric Power

基　　金：国家自然科学基金项目(50978026);高等学校博士学科点专项科研基金项目(20100009110014);北京交通大学基本科研业务费项目(2011YJS293)

摘　　要：使用普通原材料和高性能减水剂成功制备出抗压强度值超过130 MPa的超高性能混凝土,并试验研究了其抗压强度的影响因素.包括水胶比、粗骨料的颗粒粒径、细骨料的细度模数、胶凝材料的掺量、矿物掺合料和钢纤维.结果显示,各因素均对超高性能混凝土的抗压强度有一定影响,尤其是水胶比和矿物掺合料影响显著.当水胶比介于0.21和0.24之间时,超高性能混凝土的抗压强度随着水胶比的增大而降低,但水胶比为0.16的超高性能混凝土抗压强度值反而低于水胶比为0.18的混凝土的抗压强度.硅灰、粉煤灰和矿粉以1∶2∶1的质量比混掺使用最有利于提高超高性能混凝土的抗压强度,28 d龄期时抗压强度值达到138 MPa.With a quite low water to binder ratio （ W/B）, using normal raw materials and high-performance superplasticizer, ultra- high-performance concrete with coarse aggregate can be prepared with compressive strength over 130 MPa. An experimental investiga- tion was conducted on a couple of factors influencing compressive strength of UHPC, including W/B, particle size of coarse aggregate, fine modulus of fine aggregate （artificial sand）, content of binder materials, types and contents of mineral admixtures, and steel fiber. The experimental results indicated that all the factors tested more or less affected compressive strength of ultra-high-performance con- crete with coarse aggregate. The W/B ratio and mineral admixtures influenced compressive strength of UHPC significantly. When W/B ratio was between 0.21 and 0.24, compressive strength of UHPC decreased remarkably with the increasing W/B. However, compres- sive strength of UHPC at 0.16 W/B ratio was slightly lower than that at 0.18 W/B ratio. With regard to the mineral admixtures, com- pressive strength of UHPC incorporating a compound of silica fume, fly ash and ground granulated blast furnace slag, with the mass ra- tio of 1： 2： 1, reached 138 MPa at the age of 28 d, the highest compressive strength tested.

关 键 词：超高性能混凝土 粗骨料 抗压强度 

分 类 号：TU375.4[建筑科学—结构工程]