可控型循环压井钻孔装置的研制与应用  

Development and Application of Controllable Circulation Well-killing Drilling Device

作　　者：李志广[1] 陈冬[1] 闫永维[1] 甘宝安[1] 李风涛[1] 张子佳[1] 李川[1] 

机构地区：[1]大港油田石油工程研究院

出　　处：《石油机械》2012年第12期86-88,92,共4页China Petroleum Machinery

基　　金：中石油大港油田2011年局级项目"滩海井口防喷封堵抢险配套技术研究与应用"(20111102)

摘　　要：要重新恢复不规则封堵的老井或长停井时,现场施工中需要一种配套设备对油井进行泄压、压井,然后安装井口装置。为此,研制了可控型循环压井钻孔装置。该钻孔装置用卡箍与套管固定,用简易手动泵推动活塞向钻头加压,在油井套管钻孔建立压井通道后,可对油井进行有控制的泄压、压井施工。现场应用结果表明,可控型循环压井钻孔装置是一套安全、可靠、实用的工具,具有耐压高、操作简便和井口压力可控的特点,设计强度满足高压井口的要求,成功解决了老井和长停井恢复问题。To renovate the old wells or stop wells with irregular plugging a type of supporting equipment is nee- ded in the field construction to conduct pressure relief and killing in oil well and then to install wellhead. Therefore, the controllable circulation well-killing drilling device was developed. The device is fastened by clamp and cas- ing. The simple manual pump is used to make the piston pressurize the drilling bit. The operation of controlled pres- sure relief and killing in oil wells can be carried out after the killing channel of oil well is created by boring in the casing. The field application shows that the device is a set of safe, reliable and practical tools characterized by re- sistant to high temperature, simple operation and controllable wellhead pressure. The design strength satisfies the requirement of high-pressure wellhead, successfully solving the problem of recovering old wells and stop wells.

关 键 词：可控循环 压井 钻孔装置 泄压 井口 

分 类 号：TE931[石油与天然气工程—石油机械设备]