基于模糊综合评判法评价发光二极管灯具的可靠性  

Evaluation of reliability for LED lamp based on fuzzy algorithm

作　　者：李德胜[1] 邹琳[1] 张云翠[1] 邹念育[1] 姜楠[2] 

机构地区：[1]大连工业大学光子学研究所,辽宁大连116034 [2]国家半导体照明工程研发及产业联盟,北京100000

出　　处：《光学精密工程》2012年第12期2661-2666,共6页Optics and Precision Engineering

基　　金："十二五"国家科技支撑计划资助项目(No.2011BAE01B06);辽宁省高校优秀人才计划资助项目(No.LR201006);辽宁省教育厅科研项目(L2012184);大连市科技计划资助项目(No.2011A12GX014);大连工业大学青年科学基金资助项目(No.QNJJ201219)

摘　　要：基于数学模糊综合评判法建立了一种发光二极管(LED)灯具可靠性评价的模型。首先,从LED光源、散热系统、使用环境3个方面对影响LED灯具可靠性的因素进行了分析,建立了评价LED灯具寿命的因素集、评判集;然后,采用德尔菲调查法得到了各因素相应的权重系数;最后,通过选择合适的模糊算子建立了灯具可靠性评价模型。利用所建立的模型对一款LED路灯的可靠性进行了评价,结果表明:所建立的数学模型可以快速、有效地评价LED灯具系统的可靠性。利用所建立的模型,不仅可以节省寿命试验成本,还可为早期失效产品的筛选及产品质量管理提供依据。An evaluation method for the reliability of Light Emitting Diode（LED） lamps was estab- lished based on fuzzy comprehensive evaluation algorithm. Firstly, the major factors which affect the reliability of LED lamps were studied from three aspects on the LED light source, heat-removal sys- tem and working environments, and a factor set and an evaluating set for the LED lamp lifetime were built up at the same time. Then, the weighing coefficient of each factor was obtained based on Delphi evaluation method. Finally, the evaluation model for the reliability of LED lamps was built up by choosing appropriate fuzzy operators. The reliability of a LED streetlight lamp was evaluated using the evaluation model. The results show that the designed model can evaluate the reliability of LED lamps quickly and effectively. It not only can save the experiment cost, but also can provide the foun- dation for screening failure products and managing product quality.

关 键 词：发光二极管灯具 可靠性 模糊算法 评价模型 

分 类 号：TN383.1[电子电信—物理电子学] TN312.8