废水污染物排放总量监测方法及系统设计  

Method and System Design for Wastewater Contamination Emission Monitoring

作　　者：徐友[1,2] 吕锡武[2] 张子凡[3] 孔祥伟 

机构地区：[1]南京农业大学工学院,江苏南京210031 [2]东南大学,江苏南京210096 [3]南京市环境监测中心站,江苏南京210013 [4]南京新思维自动化科技有限公司,江苏南京210039

出　　处：《测控技术》2012年第12期33-35,40,共4页Measurement & Control Technology

基　　金：国家十二五水专项课题(2012ZX07101005)

摘　　要：针对目前我国工业点源水污染在线自动监测系统存在的废水取样和分析(测量)间隔时间过长导致废水污染物排放总量监测、计算不准确以及排污企业容易掌握其废水采样规律并经常偷排、突排高浓度废水而不能被有效监测的问题,提出一种按废水排放流量比例随机采样、统一存储综合水样进行污染物排放总量监测和计算的技术方案以及相应的智能化污水污染物总量监测系统结构,并阐述其工作原理。该智能化监测系统可有效克服现有水污染在线自动监测系统在运行中存在的计算时间长、监测误差大和取样规律易泄漏的缺陷。There are some problems with the on-line automatic wastewater contamination emission monitoring system for domestic industrial pollution point source currently.For instance,the interval time of wastewater sampling and the process of measurement and analysis is too long,so that the monitoring and calculation for total amount of wastewater contamination emission are imprecise,and pollution emission enterprises are easy to grasp the law of waste water sampling and always discharge high concentration wastewater suddenly or by stealth.Considering the above mentioned problems,a technical solution to the on-line automatic monitoring system is proposed.The solution adopted random time interval for wastewater sampling which is in direct proportion to flow rate and stored every wastewater sample together for monitoring and calculating the total amount of wastewater emission.The architecture and work principle of the intelligent monitoring system are also introduced, which can effectively overcome many defects of the existing on-line automatic water pollution monitoring system,such as long computing time,large monitoring error and easy leakage of sampling rule.

关 键 词：环境监测 排污总量监测 COD监测 

分 类 号：X853[环境科学与工程—环境工程]