基于连续视频的HDPE发泡材料蠕变性能试验方法研究  

Test Method Research on Creep of HDPE Structure Foam Material Based on Continuous Video

作　　者：陈林林[1] 李俊源[1] 姜献峰[1] 杨德伟[1] 饶聪超[1] 

机构地区：[1]特种装备制造与先进加工技术教育部/浙江省重点实验室(浙江工业大学),浙江杭州310014

出　　处：《轻工机械》2012年第6期82-85,共4页Light Industry Machinery

摘　　要：提出了一种适用于复杂工况下基于连续视频的非接触式应变检测方法,对高密度聚乙烯结构发泡材料进行蠕变特性试验研究。通过记录试样上标记的像素变化来确定试样的伸长量,从而得到试样的蠕变变形量,最终得到高密度聚乙烯材料在自然条件下的蠕变规律。该方法能够记录试样的连续变化情况。This paper presented a non-contact strain measurement study creep characteristics of high density polyethylene structure the sample marked pixel changes to determine sample elongation, get the creep law of a high density polyethylene material unde method based on the continuous video which used to foam material sample in complex conditions, through thus to get the specimen＇s creep deformation. Finally r natural conditions. This method is able to record continuous changes of the length of the sample. [ Ch,8 fig. 1 tab. 9 ref. ]

关 键 词：高密度聚乙烯 结构发泡 连续视频 非接触式应变检测 蠕变 

分 类 号：TH823[机械工程—仪器科学与技术]