冷轧汽车板磷化膜质量检测的实用方法  

Practical Mefhod for Quality Testing of Phosphate Coatings on Cold Rolled Automobile Steel Sheets

作　　者：陈义庆[1] 徐小连[1] 钟彬[1] 肖宇[1] 艾芳芳[1] 李琳[1] 

机构地区：[1]鞍钢股份有限公司技术中心,鞍山114009

出　　处：《腐蚀与防护》2013年第1期77-79,共3页Corrosion & Protection

摘　　要：利用电化学检测技术判定冷轧汽车板磷化膜的质量。利用恒电流/恒电位仪,测试磷化膜在磷酸盐溶液中的开路电位与时间的关系曲线,根据该曲线出现拐点的时间结合生产经验可以判定磷化膜的质量。结果表明,磷化膜质量与曲线上拐点出现时间密切相关,拐点出现越晚,膜质量越好,拐点出现的时间t≤300s时,磷化膜质量差;拐点出现时间700s<t≤1 000s时,磷化膜质量好;拐点出现时间t>1 000s时,磷化膜质量很好。The quality of phosphate coatings on cold rolled automobile steel sheets was judged by electrochemical technology. The relation currve between the open circuit potentials of phosphate coatings and time was tested in phosphate solution by constant current/potentiostat. The quality of phosphate coatings was determined at the inflection point time of the curve. The results indicates that when inflection point time （t）≤300 s, the quality of phosphate coatings is weak; when 300 s〈t≤700 s, the quality of phosphate coatings is common; when 700 s〈t≤1 000 s, the quality of phosphate coatings is good; when t〉1000 s, the quality of phosphate coatings is excellent.

关 键 词：冷轧汽车板 磷化膜 磷酸盐 开路电位 拐点 

分 类 号：TG178[金属学及工艺—金属表面处理]