Monolithic quasi-sliding-mode controller for SIDO buck converter with a self-adaptive free-wheeling current level  

作　　者：吴晓波 刘晴 赵梦恋 陈明阳 

机构地区：[1]Institute of VLSI Design,Zhejiang University

出　　处：《Journal of Semiconductors》2013年第1期100-106,共7页半导体学报（英文版）

基　　金：Project supported by the National Natural Science Foundation of China (No.60906012);the Analog Devices,Inc.(ADI)

摘　　要：An analog implementation of a novel fixed-frequency quasi-sliding-mode controller for single-inductor dual-output（SIDO） buck converter in pseudo-continuous conduction mode（PCCM） with a self-adaptive freewheeling current level（SFCL） is presented.Both small and large signal variations around the operation point are considered to achieve better transient response so as to reduce the cross-regulation of this SIDO buck converter.Moreover,an internal integral loop is added to suppress the steady-state regulation error introduced by conventional PWM-based sliding mode controllers.Instead of keeping it as a constant value,the free-wheeling current level varies according to the load condition to maintain high power efficiency and less cross-regulation at the same time.To verify the feasibility of the proposed controller,an SIDO buck converter with two regulated output voltages,1.8 V and 3.3 V,is designed and fabricated in HEJIAN 0.35 m CMOS process.Simulation and experiment results show that the transient time of this SIDO buck converter drops to 10 s while the cross-regulation is reduced to 0.057 mV/mA,when its first load changes from 50 to 100 mA.An analog implementation of a novel fixed-frequency quasi-sliding-mode controller for single-inductor dual-output（SIDO） buck converter in pseudo-continuous conduction mode（PCCM） with a self-adaptive freewheeling current level（SFCL） is presented.Both small and large signal variations around the operation point are considered to achieve better transient response so as to reduce the cross-regulation of this SIDO buck converter.Moreover,an internal integral loop is added to suppress the steady-state regulation error introduced by conventional PWM-based sliding mode controllers.Instead of keeping it as a constant value,the free-wheeling current level varies according to the load condition to maintain high power efficiency and less cross-regulation at the same time.To verify the feasibility of the proposed controller,an SIDO buck converter with two regulated output voltages,1.8 V and 3.3 V,is designed and fabricated in HEJIAN 0.35 m CMOS process.Simulation and experiment results show that the transient time of this SIDO buck converter drops to 10 s while the cross-regulation is reduced to 0.057 mV/mA,when its first load changes from 50 to 100 mA.

关 键 词：DC-DC converter FAST-RESPONSE sliding mode control single-inductor dual-output PCCM 

分 类 号：TN47[电子电信—微电子学与固体电子学]