超短电子脉冲的时空转换测量方法理论研究(英文)  

Theoretical research on time-space conversion method for measuringultra-short electron pulse width

作　　者：吴建军[1,2] 袁锡明[1,2] 赵宝升[3] 田进寿[3] 李军科[1,2] 

机构地区：[1]江苏省无线传感系统应用工程技术开发中心,江苏无锡214153 [2]无锡商业职业技术学院,江苏无锡214153 [3]中国科学院西安光学精密机械研究所,西安710068

出　　处：《强激光与粒子束》2013年第2期517-521,共5页High Power Laser and Particle Beams

基　　金：Supported by Youth Foundation of National Natural Science Foundation of China(60901036);Qinlan Project Training Plan(Jiangsu teacher[2008]30#)

摘　　要：分析了超快电子枪处于扫描状态下电子束的传输特性,对飞秒量级的超短电子束脉冲通过偏转扫描系统时的偏转距离等物理量进行了数值计算。计算结果显示:为确保电子束能够顺利通过偏转扫描系统并最后轰击直径为30mm的荧光屏,必须加一个700～1400V的初始电压,以便抵消负斜坡扫描电压的作用;700～1400V的初始电压和负斜坡扫描电压的共同作用,是扫描实验成功的一个前提。扫描实验成功的另一个前提是激发光电阴极的光路和控制扫描的电路之间的同步。讨论了前提一带给同步实验的巨大困难,并设计了一个可以在扫描实验中以较高效率调节光路延时的实验系统,该系统可解决脉宽测量实验中扫描斜坡电压信号和超快电子脉冲的同步难题。The transmission characteristics of ultra-short electron beams of the ultra-fast electron guns in scanning state were analysed, and the deflection distance of the ultra-short electron beams passing the deflec- tion-scan system was calculated. The results indicate that the initial voltage must be within the range of 700- 1400 V to counterbalance the effect of the negative scan slope voltage, ensuring that the electron beams will pass the deflection-scan system and finally hit the phosphor screen of 30 mm in diameter, and the cooperative func- tion of the initial voltage and the negative scan slope voltage is one of the two premises of the scan experiment. The other premise is the synchronization of the electrical and the optical signals. Following the discussion of the great difficulty caused by the first promise, an experimental system that can adjust the optical delay more effec- tively in the scan experiment was designed, which can facilitate the synchronization of the negative scan slope voltage and the ultra-fast electron pulse.

关 键 词：超快电子衍射 偏转扫描系统 时间-空间转换测量法 同步 

分 类 号：O463[机械工程—光学工程] TN2[理学—电子物理学]