细旦涤纶低弹网络丝的生产工艺  

PRODUCTION TECHNOLOGY OF FINE DENIER LOW-ELASTIC INTERLACED PET YARN

作　　者：王延伟[1] 宋会芬[1] 王岳安 蒋同德 

机构地区：[1]河南纺织高等专科学校,郑州450007 [2]新乡白鹭化纤有限公司

出　　处：《合成纤维工业》2000年第4期61-63,共3页China Synthetic Fiber Industry

摘　　要：研究了 83.3dtex/ 72 f细旦涤纶低弹网络丝在生产过程中纺丝温度、上油率、POY断裂伸长、条干不匀率、网络工艺等因素对生产的影响。结果表明 ,纺丝温度 2 88℃ ,上油率控制在 0 .5%～ 0 .6 %,条干不匀率小于 3.75%,网络工艺控制要防止出现飘丝 ,可生产出优质细旦纤维。The effects of spinning parameters such as spinning temperature, oiling, POY elongation at break, yarn unevenness and interlacing process on the production of 83 3 dtex/72f fine denier low\|elastic interlaced PET yarn were studied. The result showed that the top\|quality fine denier fiber could be obtained when the spinning parameters were selected as the spinning temperature of 288℃, oil up\|take in the range of 0 5%~0 6% and yarn uneveness below 3 75% (CV) and when drift filament was successfully avoided during the course of interlacing.

关 键 词：网络丝 工艺 细旦纤维 聚酯纤维 低弹丝 

分 类 号：TQ340[化学工程—化纤工业]