诊断FPGA连线资源单故障的最少编程步数  

Minimizing Programming Steps for Diagnosis of Interconnect Faults in FPGA's

作　　者：余殷雷[1] 司派发[1] 黄维康[1] 

机构地区：[1]复旦大学电子工程系CAT室,上海200433

出　　处：《微电子学》2000年第4期221-226,共6页Microelectronics

基　　金：国家自然科学基金资助项目(69973011)

摘　　要：提出了一种诊断基于ＳＲＡＭ的ＦＰＧＡ的连线故障的方法，该方法通过六次编程可把任何ＦＰＧＡ连线资源的单故障定位到最佳精度；同时，证明了六次编程是定位ＦＰＧＡ连线资源单故障所需要的最少步数。A procedure to diagnose single faults in SRAM based FPGA's is presented in the paper, which is nonadaptive and requires six programming steps to give the exact position and type of any single fault in a FPGA. It has been proved that the number of programming steps required for the procedure is minimal for a non-adaptive procedure with the given interconnect model.

关 键 词：现场可编程门阵列 故障检测 故障诊断 

分 类 号：TN431.2[电子电信—微电子学与固体电子学]