检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
出 处:《机械工程师》2013年第1期20-21,共2页Mechanical Engineer
摘 要:在实际生产中,基于CAM软件,对大批量小尺寸曲面类零件进行自动编程加工,单件加工耗时过长,而通过增大背吃刀量及加大指令进给速度都不能明显提高加工效率。文中通过合理设置工艺参数,在保证零件加工质量的前提下,达到提高生产效率的目的。Based on the CAM software, single-piece processing time is too long for the mass and small-size curvcd surface parts in actual automatic programming and machining. Processing efficiency cannot be significantly improved by increasing the cutting depth and feed rate. Production efficiency is improved by setting reasonable processing parameter, which can also ensure the quality of the parts processing.
分 类 号:TG659[金属学及工艺—金属切削加工及机床]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.56