500kV并联电抗器现场局部放电试验研究  

Study on Spot Test of Partial Discharge for 500 kV Shunt Reactor

作　　者：刘赟[1] 叶会生[1] 单周平[1] 刘兴文[1] 段肖力[1] 黄海波[1] 万勋[1] 

机构地区：[1]湖南省电力公司科学研究院,长沙410007

出　　处：《高压电器》2013年第2期80-84,共5页High Voltage Apparatus

摘　　要：局放试验是检测电力设备绝缘状况最为有效的手段之一。目前在中国500kV电压等级电抗器现场局部放电试验还处于研究摸索阶段。相比变压器局放试验，电抗器局放试验具有试验容量大、试验装置复杂、屏蔽难度大、检测回路电流大等特征。笔者介绍了500kVgE抗器局放试验装置的配备情况，以及试验方法、试验原理和相关计算。试验结果表明，试验设备的配置具备在现场完成1台500kV、40—60MV·A电抗器局部放电试验的要求。Partial discharge test is one of the most effective methods for inspecting the insulation condition of electrical equipment. Compared with partial discharge test of transformer, partial discharge test of reactor has the features of large capacity, complicated testing equipment, difficult shielding, heavy current in testing circuit, and so on. In this paper, the configuration of the testing device for 500 kV shunt reactor, as well as its test method, principle and calculation, is introduced. Test results indicate that the configuration of the testing device meets the requirement for spot test of partial discharge of a 500 kV, 40-60 MV. A reactor.

关 键 词：500 KV 并联电抗器 局部放电试验 

分 类 号：TM472[电气工程—电器]