检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:韦兴文[1] 李明[1] 周筱雨[1] 王翕[1] 李敬明[1]
机构地区:[1]中国工程物理研究院化工材料研究所,绵阳621900
出 处:《复合材料学报》2013年第1期218-222,共5页Acta Materiae Compositae Sinica
基 金:国家自然科学基金(10832003)
摘 要:实验研究了温度与湿度因素对玻璃微珠增强硬质聚氨酯复合泡沫塑料(玻璃微珠/RPUF)黏弹力学性能的影响。结果表明,湿度对黏弹力学性能有显著的影响,随着湿度的增加,玻璃微珠/RPUF的储能模量减小,刚度下降,力学损耗因子值增加,蠕变柔量增大,柔韧性增强。湿度对玻璃微珠/RPUF弯曲蠕变性能的影响具有类似于时间-温度等效原理的等效关系,并给出了60℃/50%RH参考温湿度下玻璃微珠/RPUF的蠕变主曲线和平移因子。The viscoelastic behavior of glass microsphere reinforced rigid polyurethane syntactic foams (glass microsphere/RPUF) under different temperatures and humidities was investigated. The experimental results show that temperature and humidity have an obvious effect on viscoelastic behavior of glass microsphere/RPUF. With increasing the relative humidity, the loss factors value increases while the storage modulus decreases. Under the same temperature, the creep compliance increases as humidity increasing. Using the time- humidity super-position principle, each master curve can be shifted to collapse into the reference master curve by introducing shift factors for humidity, and the master curves of creep compliance at reference temperature(60 C) and humidity(50 % RH) are put forward.
关 键 词:硬质聚氨酯泡沫塑料 湿度 黏弹力学性能 时间-温度等效原理
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.66