以造纸废水为主的某污水处理厂工艺设计  

Process Design of a Papermaking Wastewater Treatment Plant

作　　者：方明亮[1] 杨云龙[1] 翟家斌 

机构地区：[1]太原理工大学环境科学与工程学院,山西太原030024 [2]山东瑞清环境工程有限公司,山东济南250308

出　　处：《中国给水排水》2013年第4期32-35,共4页China Water & Wastewater

摘　　要：在以造纸废水为主的某污水厂的设计过程中,根据水质特点及回用要求,对板纸生产废水采用水解酸化/射流曝气池/曝气生物滤池/活性炭吸附工艺处理,对生活纸废水采用水解酸化/射流曝气池/活性炭吸附工艺处理,并根据调试情况在板纸生产废水处理工艺中引入芬顿法,从而保证了出水水质达到《城镇污水处理厂污染物排放标准》(GB 18918—2002)的一级A标准。In the design of a wastewater treatment plant, according to the characteristics of papermaking wastewater and the reuse requirements, the hydrolysis acidification/jet aeration tank/biological aerated filter/activated carbon adsorption process was used to treat paperboard wastewater, and the hy- drolysis acidification/jet aeration tank/activated carbon adsorption process was used to treat tissue paper wastewater. According to the commissioning situation, the Fenton process was introduced in the paper- board wastewater treatment to ensure that the effluent quality meets the first level A criteria specified in Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant （ GB 18918 - 2002 ）.

关 键 词：造纸废水 射流曝气 曝气生物滤池 活性炭吸附 芬顿氧化 

分 类 号：X793[环境科学与工程—环境工程]