相位生成载波调制解调法测量微振动的实现及干扰分析  

Realization of Measuring Micro-Vibration Based on Phase Generated Carrier Modulation-Demodulation Method and Interference Analysis

作　　者：唐伟杰[1] 付雷[1] 陈淑芬[1] 邹正峰[1] 孟彦彬[1] 

机构地区：[1]北京理工大学光电学院,北京100081

出　　处：《中国激光》2013年第2期209-214,共6页Chinese Journal of Lasers

摘　　要：分析了相位生成载波(PGC)调制解调法测量微小振动的基本原理,搭建了迈克耳孙型干涉测量系统,研究了声波频段信号微振动的测量。在此基础上分析了压电陶瓷(PZT)调制时振动频率随机波动以及相位不匹配对解调造成的影响。理论和实验表明PZT调制的稳定性对最后解调的波形有很大的影响,调制频率的稳定可以消除解调引入的信号失真,相位的匹配能使解调信号信噪比达到最大。为减小PZT的影响,对实验系统进行了改进。The basic principle of measuring micro-vibration based on phase generated carrier （PGC） modulation- demodulation method is analyzed. A Michelson interferometer measurement system is set up and the micro-vibration measurement of acoustic frequency band signal is studied. Based on this, influences of random fluctuations of the vibration frequency and the phase mismatch in the modulation of the piezoelectric ceramic （PZT） on the demodulator are analyzed. Theoretical and experimental results show that the stability of the PZT modulation has a great impact on the final demodulated waveform. The stability of the modulation frequency can eliminate the signal distortion caused by demodulation, and phase matching makes the demodulated signal to noise ratio （SNR） maximum. In order to reduce the influence of PZT, the experimental system is improved.

关 键 词：相干光学 振动测量 相位生成载波 频率波动 相位不匹配 锁相环 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]