“零压差零泄漏”液体润滑螺旋槽机械密封性能的实验研究  

An experimental Investigation of the Sealing Characteristics of a Zero Pressure, Zero Leakage Lubricated Spiral Groove Mechanical Seal

作　　者：宋鹏云[1] 陈匡民[2] 董宗玉[2] 吴旨玉[2] 

机构地区：[1]昆明理工大学生化学院 [2]四川大学

出　　处：《流体机械》2000年第7期11-13,共3页Fluid Machinery

基　　金：国家教育部博士点基金

摘　　要：通过实验方法 ,研究了内外双螺旋槽机械密封端面间的液膜压力和端面温升。液膜压力直接反映了密封端面的润滑状况 ,液膜压力开始随转速的增加而增大 ,当转速较大时 ,随转速的再增大而下降。正常运转时 ,端面温升很小。实验研究表明 ,螺旋槽机械密封能在保持零泄漏的同时 ,实现端面的非接触。With an experimental method, the liquid film pressure between the two faces and the seal face temperature rising are measured and analyzed for a double spiral groove mechanical seal. The liquid film pressure directly reflects the face lubrication condition. The pressure increases with the shaft speed, but decrease with the shaft speed when the shaft speed is high enough. The face temperature rising is small at normal operating conditions. It is proved by the experiment that it is possible for a spiral groove to operate at a non-contacting state while keeps the leakage is zero.

关 键 词：机械密封性能 螺旋槽 零压差 零泄漏 液体润滑 

分 类 号：TH136[机械工程—机械制造及自动化]