7000m载人深潜平台加装超大载荷设备对结构影响研究  

Research of Influence of High Load Equipment Adding to 7000m Human Occupied Vehicle Platform on Structure

作　　者：周亮[1] 张新宇[1] 

机构地区：[1]中国舰船研究设计中心,武汉430064

出　　处：《船舶工程》2013年第1期92-94,共3页Ship Engineering

摘　　要："向阳红09"船是7000m载人潜水器水面指挥支持系统的母船。重型A形架是布放、回收载人潜水器的关键设备。在多变海况下作业时,A型架可能承受的最大载荷高达1000t.m。如何在母船改装进程中,确保其基座及与之连接的船体结构的强度、刚度满足要求,是该项目的关键技术之一。采用有限元法对重型A形架基座及相关船体结构进行强度计算,分析超大载荷对相关船体结构的影响。并优化结构形式,确保满足规范要求。＂Xiang Yang Hong 09＂ is the mother ship and the command center of 7000m human occupied vehicle surface support system. The heavy A type truss is the key equipment for laying and lifting back the HOV. To insure the safety of operating the HO V in any sea conditions, the heavy A type truss＇s load will reach 1000rm at maximum. One of the key technologies for the project is, during the refitting of the mother ship, how to insure the intensity and deformation of the A type truss＇s base and correlative structure fulfill the rule＇s request. The heavy a type truss bass and correlative structure are calculated by FEM and the influence of the high load equipment on the hull structure is also analyzed. The hull structure is optimized with the conclusion that the base and correlative structure＇s characteristics can fulfill the reauirements of the rules.

关 键 词：载人深潜平台 超大载荷设备 基座 结构强度 

分 类 号：U661.43[交通运输工程—船舶及航道工程]