基于高压陶瓷电容器放电回路的优化设计  

Optimization design based on the high voltage ceramic capacitor discharge circui

作　　者：殷锐[1] 董新刚[2] 

机构地区：[1]西北工业大学明德学院机电工程系,陕西西安710124 [2]中国工程物理研究院电子工程研究所,四川绵阳621900

出　　处：《电子元件与材料》2013年第3期42-45,共4页Electronic Components And Materials

摘　　要：针对使用高压电容器的几种放电回路,开展了回路参数仿真分析研究。参数辨识结果表明采用高压陶瓷电容和固态开关组成的放电回路参数明显优于采用高压固体电容器和触发管的放电回路,改进装配方式后回路参数也比改进之前明显减小。该改进技术的提出,在不改变既定电性能指标的基础上大大改善了整个回路电路的体积与质量。该改进技术已成功应用于多个爆破项目中。For use in several of the high-voltage capacitor discharge circuit loop the parameter simulation analysis study was conducted. The parameter identification results show that the discharge circuit of high voltage ceramic capacitors and solid state switch parameter is significantly better than the discharge circuit of high voltage solid capacitor and trigger tube, improved assembly way circuit parameters is smaller than that of before improvements. This technology improves the volume and quality of the entire circuit, which does not change the established electrical performance indicators. The technology is successfully applied to multiple blasting projects.

关 键 词：放电回路 高压陶瓷电容器 固态开关 仿真 优化设计 爆破项目 

分 类 号：TN783[电子电信—电路与系统]