Design of Multiple Metal Doped Ni Based Catalyst for Hydrogen Generation from Bio-oil Reforming at Mild-temperature  

太阳电池多种金属掺杂的镍基催化剂用于中温重整生物油制氢的设计

作　　者：袁丽霞[1,2] 丁芳[1] 姚建铭[1] 陈祥松[1] 刘伟伟[1] 吴金勇[1] 巩飞艳[2] 李全新[2] 

机构地区：[1]中科院合肥物质科学研究院等离子体物理研究所生物质能源研究中心,合肥230026 [2]中国科学技术大学安徽省生物质洁净能源重点实验室,合肥230026

出　　处：《Chinese Journal of Chemical Physics》2013年第1期109-120,I0004,共13页化学物理学报（英文）

摘　　要：A new kind of multiple metal （Cu, Mg, Ce） doped Ni based mixed oxide catalyst, synthesized by the co-precipitation method, was used for efficient production of hydrogen from bio-oil reforming at 250-500℃. Two reforming processes, the conventional steam reforming （CSR） and the electrochemical catalytic reforming （ECR）, were performed for the bio-oil reforming. The catalyst with an atomic mol ratio of Ni：Cu：Mg：Ce：AI=5.6：1.1：1.9：1.0：9.9 exhibited very high reforming activity both in CSR and ECR processes, reaching 82.8% hydrogen yield at 500℃ in the CSR, yield of 91.1% at 400℃ and 3.1 A in the ECR, respectively. The influences of reforming temperature and the current through the catalyst in the ECR were investigated. It was observed that the reforming and decomposition of the bio-oil were significantly enhanced by the current. The promoting effects of current on the decomposition and reforming processes of bio-oil were further studied by using the model compounds of bio- oil （acetic acid and ethanol） under 101 kPa or low pressure （0.1 Pa） through the time of flight analysis. The catalyst also shows high water gas shift activity in the range of 300-600 ℃. The catalyst features and alterations in the bio-oil reforming were characterized by the ICP, XRD, XPS and BET measurements. The mechanism of bio-oil reforming was discussed based on the study of the elemental reactions and catalyst characterizations. The research catalyst, potentially, may be a practical catalyst for high efficient production of hydrogen from reforming of bio-oil at mild-temperature.

关 键 词：Hydrogen generation BIO-OIL Ni based catalyst Mild-temperature 

分 类 号：O[理学]