检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:曾磊[1] 涂祥[1] 许成祥[1] 郑山锁[2] 吴园园[1]
机构地区:[1]长江大学城市建设学院,湖北荆州434023 [2]西安建筑科技大学土木工程学院,陕西西安710055
出 处:《建筑结构学报》2013年第3期141-151,共11页Journal of Building Structures
基 金:国家自然科学基金项目(51108041);湖北省自然科学基金项目(2011CDB009);湖北省建设科技研究项目(101048933)
摘 要:为研究非对称配钢钢骨混凝土柱的抗震性能,进行了12个T形配钢、12个L形配钢的钢骨混凝土柱试件在低周往复荷载作用下的试验研究,试验参数为剪跨比、轴压比、体积配箍率以及是否配置拉结筋,对受力过程、破坏形态、滞回特性、骨架曲线、延性、耗能能力等进行了分析比较。结果表明,在恒定轴向荷载和水平低周往复荷载共同作用下,非对称配钢钢骨混凝土柱表现出较好的受力性能,破坏形态主要有弯曲破坏、剪切黏结破坏、剪切斜压破坏、剪切复合型破坏4种,各试件表现出较明显的正负滞回环不对称现象。剪跨比对破坏形态有较大影响,剪切复合型破坏主要发生在配有严重不对称的L形配钢的试件中;各试件的延性性能均随轴压比的增大而降低,在L形配钢试件中更为明显;增大配箍率对T形配钢试件的延性和承载力均有明显的提高,并能改善试件屈服后的耗能能力,有效改善混凝土的脆性性质,但对于剪跨比较小的L形配钢试件受力性能的改善并不明显;配置拉结筋能够提高各试件的承载能力,改善加载后期试件的承载力衰减和刚度退化,并明显增强了L形配钢试件的变形能力。To study the seismic behavior of unsymmetrical steel reinforced concrete column, cyclic loading tests were carried out on 12 columns with T-shaped section steel and 12 columns with L-shaped section steel. The test parameters included shear span ratio, axial compression ratio, stirrup ratio and presence of cross tie. Mechanical process, failure mode, hysteretic characteristics, skeleton curves, ductility and energy dissipation ability were taken into comparison. The resuh indicates that unsymmetrical steel reinforced concrete column possesses good seismic performance under constant axial compression and cyclic horizontal load. The failure modes include bonding failure, shear-bond failure, shear compression failure and shear-composition failure. Obvious asymmetry phenomenon of positive and negative hysteresis loop are shown. The span ratio has great influence on failure mode and shear-composition failure usually takes place in L-shaped steel section column. With the increase of axial compression ratio, the ductility decreases, which is obvious in L-shaped steel section column. The ductility and bearing capacity of the T-shaped columns are improved greatly with the increase of sfirrap ratio, but not obvious for T-shaped steel section smaller span ratio. Cross ties can improve bearing capacity, limit strength and stiffness degradation deformation capacity of L-shape steel section columns clearly. steel section column with and enhance
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38