脱硫渣吸附剂对Cu^(2+)的吸附动力学和热力学  

Adsorption Kinetics and Thermodynamics of Desulfurization Slag Adsorbent for Copper(Ⅱ)

作　　者：郑跃国[1] 谢继铃[1] 李燕峰[1] 洪明珠[1] 罗鹏[1] 于岩[1] 

机构地区：[1]福州大学材料科学与工程学院,福州350108

出　　处：《硅酸盐学报》2013年第3期396-401,共6页Journal of The Chinese Ceramic Society

基　　金：国家自然科学基金项目(51102047);福建省科技厅重点项目(2011Y0037);福建省杰出青年科学基金(2012J06011);国家大学生实践创新计划联合资助

摘　　要：以钢铁冶炼厂干法烟气脱硫产生的脱硫渣为吸附主原料制备了除铜吸附材料。探讨了吸附剂样品对含铜废水中Cu2+吸附效果;用3种动力学经验方程和两种热力学模型对吸附过程进行了动力学和热力学表征。结果表明:Cu2+的最佳吸附条件是pH值为8～9,吸附时间为1.5 h以内。热力学和动力学过程拟合结果表明,吸附的动力学过程更符合准二级动力学速率方程,而Freundlich型吸附等温线模型能较好地模拟吸附剂样品对废液中Cu2+吸附的热力学过程。热力学和动力学分析结果表明,脱硫渣吸附剂对Cu2+的吸附并不是单层吸附,同时存在物理和化学吸附过程。The desulfurization slag produced from steel smelting plant during flue gas desulfurization process was used as main raw materials to prepare copper （ II ） （Cu2＋） adsorbent. The adsorption effect of the adsorbent samples for Cu2＋ ions in wastewater con- mining copper （II） was discussed. Three adsorption empirical kinetics equations and two thermodynamics equations were used to characterize the adsorption process. The results showed that the optimum pH value for Cu2＋ removal is 8 to 9 and absorption time is 1.5 h. The adsorption kinetics could be best described by pseudo second-order kinetic model, whereas, the adsorption isotherms could be well described by Freundlich equation. The desulphurization slag adsorbent to Cu （ II ） adsorption is not a single-layer adsorption, and exist physical and chemical adsorption process.

关 键 词：干法脱硫渣 铜吸附 动力学 热力学 

分 类 号：TB321[一般工业技术—材料科学与工程]